• English
  • Deutsch
  • Français
  • 日本語
  • Deutschland(USD $)
mobile1
Professional precision ball bearing manufacturer Professional precision ball bearing manufacturer
685ZZ Miniature Ball Bearing – 5 × 11 × 5 mm
685ZZ Miniature Deep Groove Ball Bearing
685ZZ Miniature Ball Bearing – 5 × 11 × 5 mm
685ZZ Miniature Deep Groove Ball Bearing
685ZZ Miniature Ball Bearing – 5 × 11 × 5 mm
685ZZ Miniature Deep Groove Ball Bearing

685ZZ Miniature Ball Bearing – 5 × 11 × 5 mm

Verified 685ZZ dimensions, double metal shields, motor-interface selection notes and sample validation support for compact motor designs. Final selection depends on fits, speed, loads, temperature and lubrication.
$0.00 USD $0.00 USD
WhatsApp:+8617318003151
Email:shelly@lumibearing.com
WhatsApp:+8615224566795
Email:uny@lumibearing.com
Beschreibung

685ZZ is a miniature deep-groove ball bearing with verified nominal dimensions of 5 mm bore, 11 mm outside diameter and 5 mm width. It can be evaluated for compact motor and mechanism designs that match these dimensions, but suitability for a drone or FPV motor depends on the shaft/housing fits, speed, loads, temperature, lubrication, environment and sample test.

Model 685ZZ
Bore (d) 5 mm
Outside diameter (D) 11 mm
Width (B) 5 mm
Closure Double metal shield (ZZ) for this listed model

Configuration and specification review

Material, internal clearance, lubricant, tolerance and noise/vibration requirements must be confirmed for the requested project specification. LUMI can discuss available clearance, grease and shield/seal configurations; a requested alternative is not assumed to be interchangeable with 685ZZ until its drawing and application conditions are reviewed.

Selection notes

  • Confirm the 5 × 11 × 5 mm envelope and mating tolerances from the assembly drawing.
  • Review normal and peak speed, radial/axial loads, temperature and contamination.
  • Check how interference fits and temperature affect operating clearance.
  • Validate running current, temperature, noise and vibration in the complete motor.

Where a miniature bearing works in a brushless drone motor

In a brushless motor, miniature bearings support the shaft and help maintain the rotor's position relative to the stator. Their result depends on the complete bearing interface: the shaft seat, housing or end-cap bore, shoulders, bearing spacing, axial constraint and the method used to press the rings into place.

The images below are LUMI-owned teardown references used to review bearing interfaces in several brushless motor layouts. They illustrate housing and end-cap features, bearing location, and shaft/rotor component relationships. The pictured motor parts are not included with the 685ZZ bearing, and the images do not establish universal fit. Evaluate 685ZZ only after confirming a 5 mm shaft, 11 mm housing bore, 5 mm available width, mating fits and operating conditions.

Brushless drone motor housings and end caps used to review the bearing seat
Housing and end-cap examples used to review the bearing seat, shoulders and assembly access.
Brushless drone motor teardown showing bearing-location examples
Bearing-location examples used to review spacing, axial constraint and rotor-to-stator alignment.
Brushless drone motor shafts and rotating components used for bearing-interface review
Shaft and rotating-component examples used to review fits, runout and the mounting-force path.

What to review at the bearing interface

  • Shaft support: check bearing spacing, shoulders and the axial locating method rather than considering one bearing in isolation.
  • Fit and concentricity: shaft and housing tolerances, runout and end-cap alignment can change operating clearance, noise, vibration and temperature.
  • Rotor-to-stator relationship: bearing position helps control the rotating assembly, but rotor balance, shaft straightness and motor geometry also affect the measured result.
  • Lubrication and closures: grease, fill quantity and metal-shield or seal configuration should be reviewed together with speed, contamination and acceptable running resistance.
  • Assembly force: apply mounting force to the ring being fitted and avoid transmitting press force through the balls.

685ZZ project drawing

The published LUMI drawing confirms the 5 mm bore, 11 mm outside diameter and 5 mm width for the identified 685ZZ project specification. It also shows project-level tolerance, precision, clearance, noise/vibration, lubricant and material requirements. Those detailed requirements belong to the identified drawing and should not be treated as the default for every 685ZZ quotation.

Confirm the current quotation and approved drawing before ordering. If P5, C3, Z4, a particular grease, fill range or other controlled characteristic is required, include it in the inquiry so the supplied configuration and inspection evidence can be agreed.

Nearby verified metric sizes

MR115ZZ shares an 11 mm outside diameter but has a 5 mm bore and 4 mm width; MR126ZZ is 6 × 12 × 4 mm. These are not drop-in substitutes. Any change in bore, outside diameter or width requires a drawing and assembly review.

Sample and inspection support

LUMI can prepare samples for customer assembly validation after the specification is confirmed. Depending on the project, applicable dimensional, noise and vibration checks and available records, summaries, grading results or photos can be discussed.

Review metric miniature bearing sizes, Drone and FPV motor bearing support, sample validation before mass production and LUMI inspection capabilities.

For broader project planning, review the OEM miniature bearing workflow and the documented drone motor development discussion. These pages explain the information and validation steps required before a model is approved for an assembly.

Request a 685ZZ discussion or sample by sending the application, quantity, mating dimensions and operating conditions.